In short. SPF (the list of servers allowed to send email with your domain) tells receiving mailboxes which senders are genuine. If it is missing or wrong, your messages can land in spam or be refused, and customers may never see them. You can do it yourself, or ask whoever manages your domain if that is a provider or agency. It takes a few minutes to set up, then IONOS says up to 48 hours for it to take effect everywhere.
To set up SPF on IONOS, open the DNS settings of your domain, click Add Record, click IONOS SPF (TXT), then click Save. IONOS creates the record for its own mail servers. If your DNS zone is hosted elsewhere, create a TXT record yourself with the value from IONOS's help page for your country: v=spf1 include:_spf-us.ionos.com ~all on ionos.com (see "US or EU value?" below).
SPF lists the servers allowed to send email for your domain. It lowers the chance of your mail landing in spam and is the base DMARC builds on.
Last verified: November 18, 2026, against IONOS's official English help (ionos.com and ionos.co.uk).
Before you start: list your senders
A domain must have only one SPF record, and it must cover every service that sends mail with your address: IONOS mailboxes, your website (forms, shop), newsletters, invoicing software. Note the include: value each service gives in its own help.
The steps below assume your domain uses IONOS name servers. If it does not, make the change at the provider that hosts your DNS zone.
Step 1: open the DNS settings
- Log in to your IONOS account and open Domains & SSL.
- On the row of your domain, click the gear icon under Actions, then click DNS.
- Look for a
TXTrecord whose value starts withv=spf1.
Step 2: turn on IONOS SPF
If your mailboxes are at IONOS and no SPF record exists:
- Click Add Record.
- Click IONOS SPF (TXT).
- Click Save.
IONOS says that if an SPF record already exists for another email service, it adds its own mail server information to that record automatically. Check the result in Step 4 anyway. IONOS also notes that IONOS SPF is normally enabled by default for domains hosted on its DNS, so you usually need to do nothing.
Step 3: add another service to your SPF
To authorize one more service next to IONOS (Google Workspace, a newsletter tool), edit the existing record instead of adding a second one:
- On the
TXTrow that starts withv=spf1, click the gear icon under Actions, then Edit record. - Leave Host name on
@. - In Value, add the new
include:just before~all. - Click Save.
Example with IONOS and Google Workspace (see our SPF guide for Google Workspace):
v=spf1 include:_spf-us.ionos.com include:_spf.google.com ~allIONOS warns that you should edit or delete this record only if you understand the effects: a mistake can disrupt your outgoing mail.
If your DNS zone is hosted elsewhere
Mailboxes at IONOS but DNS at Cloudflare or with your agency? At that provider, create a TXT record on the domain itself with the value from the next section.
US or EU value?
IONOS's help pages do not all give the same value:
- the English page on ionos.com gives
v=spf1 include:_spf-us.ionos.com ~all; - the English page on ionos.co.uk and the French page give
v=spf1 include:_spf-eu.ionos.com ~all.
None of the pages we read explains the difference between the two, so we do not guess. Use the value shown in the help of the IONOS country site where your account is, or let the IONOS SPF (TXT) button create the record when your DNS is at IONOS.
Step 4: check it works
IONOS applies the change immediately, but says it may take up to 48 hours to take effect everywhere. Then:
nslookup -type=TXT yourdomain.comYou should see exactly one line starting with v=spf1, containing the IONOS include: if you send through IONOS. Our free SPF checker also counts the DNS lookups.
From ~all to -all
IONOS publishes ~all (soft fail): an unlisted server is treated as suspicious without being systematically rejected. Keep it until you are sure every sender is listed.
Move to -all (hard fail, unlisted senders are rejected) once your DMARC reports have shown for several weeks that every legitimate sender passes. To get those reports, follow our guide on setting up DMARC on IONOS.
Known pitfalls
- Two SPF records: an old record from a former provider plus the IONOS one. The standard allows only one: with two, SPF fails with an error.
- The 10-lookup limit: every
include:,a,mxorredirectcosts at least one DNS lookup, and includes chain into others. Past 10, SPF fails. Remove abandoned services before adding new ones. - An
include:after~all: it is ignored. - Editing the IONOS zone while the domain points elsewhere: the change has no effect. Check which name servers your domain uses first.
Frequently asked questions
Do I also need to enable DKIM at IONOS?
Yes, but it is usually already done. IONOS states that DKIM is activated by default and that with IONOS name servers you need to do nothing. If your DNS is elsewhere, create the three CNAME records listed in IONOS's DKIM help (s1-ionos._domainkey, s2-ionos._domainkey and a third one specific to your account) at that provider.
My IONOS SPF has other include: entries. Is that normal?
Yes, if they match services you really use. Remove those of former providers: they use up DNS lookups and authorize servers that no longer send for you.
Verify it's fixed. AttackScout reads your SPF record from the internet, spots duplicates and anything over 10 DNS lookups, and tells you what to fix at IONOS. Free, no account needed. Verify it's fixed
Technical details
Exact configuration. A single TXT record at the root of the domain, starting with v=spf1 and ending with an all mechanism:
v=spf1 include:<service-that-sends-your-email> ~allWhy. SPF (RFC 7208) lists the servers allowed to send email for your domain. The receiving server reads this TXT record and counts at most 10 DNS lookups (include, a, mx, exists, redirect): beyond that the result is permerror and SPF protects nothing. Two SPF records also give permerror. ~all flags without rejecting; -all makes receivers reject anything not listed.
To check it yourself. Exactly one line must start with v=spf1:
dig +short TXT your-domain.comReference: https://www.rfc-editor.org/rfc/rfc7208
Sources
Accessed November 18, 2026.
- IONOS, Using IONOS SPF to Improve Email Delivery (ionos.com): https://www.ionos.com/help/domains/configuring-mail-servers-and-other-related-records/using-ionos-spf-to-improve-email-delivery/
- IONOS, same page on the UK site (
_spf-euvalue): https://www.ionos.co.uk/help/domains/configuring-mail-servers-and-other-related-records/using-ionos-spf-to-improve-email-delivery/ - IONOS, Managing TXT Records: https://www.ionos.com/help/domains/configuring-txt-and-srv-records/managing-txt-records/
- IONOS, Email Authentication with DKIM: https://www.ionos.com/help/domains/configuring-mail-servers-and-other-related-records/email-authentication-with-dkim/
- IONOS, French page on IONOS SPF (
_spf-euvalue): https://www.ionos.fr/assistance/domaines/configurer-les-serveurs-de-messagerie-et-les-enregistrements-associes/eviter-lenvoi-de-courrier-indesirable-spam-grace-a-un-enregistrement-spf/ - IETF, RFC 7208 (SPF), section 4.6.4 on the 10-lookup limit: https://www.rfc-editor.org/rfc/rfc7208